Physical and mechanical performance
Test Spec: ASTM D 523, BMW AA-0101, DIN EN ISO 2813, FLTM BI 110-01, GB/T 9754, ISO 2813;
02Colorimeter
Test Spec: AATCC Grey Scale Procedure 2, ISO 105-A02/A03, SAE J1545;
03Pencil Hardness
Test Spec: GB/T 6739, ISO 15184;
04Film Thickness-Coating
Test Spec: DIN EN ISO 2178, DIN EN ISO 2360, DIN EN ISO 2808, GB/T 13452.2, ISO 1456, ISO 1463, ISO 2808;
05Film Thickness-Plating
Test Spec: ASTM B764, DIN EN ISO 2177, ISO 2177;
06Wear Test (Taber)Test Spec: ASTM D 4060, BMW PR360, FLTM BN 108-02, GB/T 1768, GMW 3208, SAE J365, SAE J948;
07Linear Abrasion
Test Spec: BMW AA-0134, FIAT 50488/02, GMW 14125, PV 3987;
Test Spec: BMW AA-0134, FLTM BI 161-01, FLTM BN 107-01, GB/T 3920, ISO 105-X12, ISO 20433, MBN 10494-5 s5.8.2, PV 3906, PV 3987;
09Scratch & Mar
Test Spec: FLTM BO 162-01, GMW 14698, LP-463DD-18-01, MBN 10494-5 s5.1.1, PV 3952，SMTC 5 400 014;
10Adhesion Test
Test Spec: BMW AA-0180, DBL 5416 s12.4, DIN EN ISO 2409，FLTM BI 106-01, GB/T 9286, GMW 14829, ISO 2409;
11Steam Jet Test
Test Spec: BMW AA-0136, DBL 5416 A.2.9, DBL 5425 s8.6, DIN 55662, FLTM BO 160-04, GMW 16745 (GM 9531P), MBN 10494-5 s5.3, PV 1503;
12Stone Chip Resistance Test
Test Spec: BMW AA-0079, DBL 5416 A.2.6, DBL 5425 s8.5, DBL 8465 Table 9&10, DIN EN ISO20567-1, FLTM BI 157-06, GMW 14700, FLTM BI 157-06, ISO 20567-1, MBN 10494-5 s5.2.1, SAE J 400;
13Mechanical Behavior Test
Test Spec: GB/T 1040, GB/T 9341, GB/T 13022, ISO 178, ISO 527, ISO 1184;
14Impact Test
Test Spec: ASTM D 5420, GB/T 1732, ISO 4532;
15Abrex Abrasion Test
Test Spec: BMW AA-0471, DBL 7384, DIN EN 60068-2-70, FLTM BN 155-01, GS 97034-1, 2, 3, 4, 5, 6, IEC 68-2-70.